Black Aluminium Heat Sink

This item is an Aluminium Heat Sink of dimension 100mm x 65mm x 18mm and weight 105 Grams with model number V1-THS-12-100-B that is suitable for many general-purpose electronics applications to mount small power transistors, regulators, LEDs, power resistors etc.

This heat sink can be used with circuits to mount transistors, ICs and regulators.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized extruded aluminum heat sink plate of size 137mm X 60mm X 20mm with model number V1-THS-57-60-B is suitable for general purpose electronics applications. This heatsink can be used in DIY projects and R&D prototypes. This heatsink has a base thickness of 4.75mm. This heatsink approximately weighs about 211 grams. This heat sink is also suitable for small power audio amplifiers.

Note that there could be 1mm-2mm variation in the heatsink size.

This item is a Black Anodized Aluminium Heat Sink of dimension 150mm x 50mm x 14 mm and weight 135 Grams with model number V1-THS-23-150-B, suitable for many general-purpose electronics applications to mount small to medium power transistors, regulators, LEDs, power resistors etc.

This heat sink can also be used with small audio power amplifiers to mount transistors, ICs and regulators.

This black anodized aluminum heat sink plate of size 150mm X 53mm X 28mm with model number V1-THS-72-150-B is suitable for general purpose electronics applications. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 2.7mm. It approximately weighs about 264 grams. This heat sink is also suitable for small power audio amplifiers.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminum heat sink plate is of size 150mm x 84mm x 19mm. It weighs around 314 grams. It is suitable for many electronics projects. This heat sink plate can be used to mount bipolar power transistors, Mosfets and IGBTs in audio amplifiers and other electronics projects where large heat dissipation is required.

This black anodized aluminum heat sink plate is of size 150mm x 95mm x 20mm. It weighs around 405 grams. It is suitable for many electronics projects. This heat sink plate can be used to mount bipolar power transistors, Mosfets and IGBTs in audio amplifiers and other electronics projects where large heat dissipation is required.

This black anodized aluminum heat sink plate of size 150mm X 95mm X 32mm with model number V1-THS-11-150-B is suitable for audio amplifier boards and other general purpose applications. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 8mm suitable to mount any type of transistor. It approximately weighs about 610 grams.

This black anodized aluminum heat sink plate of size 152mm X 70mm X 80mm with model number V1-THS-95-70-B is suitable for audio amplifier boards and other general-purpose applications. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 12mm suitable to mount any type of transistor. It approximately weighs about 925 grams.

People usually purchase this heatsink from us for Class-AB audio amplifiers and other prototyping projects.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminIum heat sink plate of size 160mm X 60mm X 40mm with model number V1-THS-77-100-B is suitable for audio amplifier and UPS circuits. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 10mm suitable to mount any type of transistor. It approximately weighs about 985 grams.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminum heat sink plate of size 180mm X 70mm X 20mm with model number V1-THS-8-70-B is suitable for general purpose electronics applications. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 5mm. It approximately weighs about 350 grams. This heat sink is also suitable for small power audio amplifiers.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminum heat sink plate of size 183mm x 70mm x 10mm and weighing 190 grams with model number V1-THS-84-70-B is suitable for many electronics projects. It comes with 31 fins for greater heat transfer. It is made of high quantity aluminum for good thermal conductivity. This heat sink can be used with computer circuit boards, power transistor, FET, IC, power amplifier, voltage regulator, MOSFET, SCR etc.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminium heat sink plate of size 196mm x 100mm x 33mm and weight 830 grams with model number V1-THS-7-100-B is suitable for heavy audio amplifiers, UPS, Inverters or any other similar applications. This heatsink has a base thickness of 7mm that can be tapped to mount components with screws.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminium heat sink plate of size 205mm X 70mm X 80mm with model number V1-THS-9-70-B is suitable for audio amplifier boards, UPS boards, Inverter Boards and other general-purpose applications. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 14mm suitable to mount any type of transistor. It approximately weighs about 1140 grams.

Clients usually purchase this heatsink from us for Class-AB audio amplifiers and other prototyping projects.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminum heat sink plate of size 250mm X 95mm X 40mm with model number V1-THS-59-95-B is suitable for heavy duty audio amplifier and UPS circuits. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 9mm. It approximately weighs about 1127 grams.

Clients usually purchase this heatsink for Class-AB audio amplifiers from us.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminum heat sink plate of size 275mm X 100mm X 20mm with model number V1-THS-92-100-B is suitable for audio amplifier boards, UPS circuits and other general-purpose applications. This heatsink can be used in DIY projects and prototypes. This heatsink has a base thickness of 5mm suitable to mount any type of transistor. It approximately weighs about 610 grams.

Clients usually purchase this heatsink from us for Class-AB audio amplifiers and other prototyping projects.

Note that there could be 1mm-2mm variation in the heatsink size.

This black anodized aluminium heat sink plate of size 300mm x 100mm x 83mm with model number V1-THS-93-100-B that is suitable for heavy duty audio amplifiers. This heatsink may also be used in heavy UPS and Invertors. This heatsink has a base thickness of 15mm. It approximately weighs about 2705 grams.